Webasto FCF 9 Especificaciones descargar pdf (Pagina 19)

Operation / Installation Manual – FCF 5000, 9000, 12000, 16000, 24000

Page 19

Power ON/OFF

• Press ON/OFF button to turn the unit display on. Press the ON/OFF button a second time to select mode

and start operation.

• While the display is active press the ON/OFF button once to turn the unit OFF. Press the ON/OFF button a

second time if the display has already entered sleep mode to turn the unit OFF.

Sleep Mode of the digital display

The ambient temperature display will automatically enter a sleep status within 5 minutes of inactivity. Press any

button on the display or the remote controller to wake the display.

Note: Normal unit operation will continue while in sleep mode, it’s only the digital display that turns off.

FAN Control

• Press the FAN button, the fan speed will change in the following order:

→ HIGH →MID → LOW → AUTO →

• In “DEHUMIDIFY” mode, the fan will work at low speed automatically

Temperature Setting

• Press temperature setting key

▲To increase in 1

increments

▼ To decrease in 1

increments

• The setting range of temperature in each mode:

COOL 61°F 86°F or 16°C 30°C

DEHUMIDIFY 61°F 86°F or 16°C 30°C

HEAT 61°F 86°F or 16°C 30°C

FAN In this mode, temperature cannot be changed.

AUTO In this mode, temperature cannot be changed.

Mode Setting

• Press this key to change the operation mode in order of

→ COOL → DEHUMIDIFY → FAN → HEAT → AUTO →

COOL Mode Operation

• In “COOL” mode, the LED next to the

icon will illuminate when mode is selected on the digital display.

● If room temperature is higher than set temperature, the unit runs in COOL mode.

● If set temperature is higher than room temperature then only the fan will run.

DEHUMIDIFY Mode Operation

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Sin comentarios

Webasto FCF 9 Especificaciones Pagina 19